Check ECG at Home | FDA Approved Handheld ECG Heart Check Pen

Check ECG at Home | FDA Approved Handheld ECG Heart Check PEN

Today I have a special review for you. A unique gadget that could even be a life-saving factor for many around. This is the only licensed handheld ECG device in the market cleared by FDA for consumer use, a device that could help in millions of life-saving diagnosis if used properly at the correct time. It's all possible with this revolutionary gadget, The heart-check pen handheld ECG device. You can watch its detailed video from the following link and product link is at the end of this page.

Video Link :- https://youtu.be/EUUikv85DW4

Getting Started

Step 1

Install the AAA batteries

Slide open the battery compartment on the back of the PEN device and install the two AAA batteries contained in the package.

Step 2

Turn the device on and set the date and time

Press the POWER button to turn the device on and use the black UP and DOWN arrow to scroll through the DAY, MONTH, and YEAR. Select the correct number by pressing the OK button.

Step 3

Capture and store

ECG readings

Take hand measurements by holding the device ensuring the metal electrodes are in direct contact with your skin.

Press the START button when ready.

When the 30-second reading is complete, select the OK (POWER) button to save the reading.

Taking Hand Readings

Step 1

Hold the PEN device with both hands

To take a hand reading to turn the device on by pressing the POWER button and hold the device ensuring the metal electrodes are in direct contact with your skin.

Your right and left index fingers should make full contact with the metal electrodes located on the top and side of the device, and your left and right thumbs should make full contact with the 2 metal electrodes located on the front of the device.

Step 2

Press the Start button

When ready, press the START button to enter the preparation stage and begin the 30-second reading.

While the device is on, you can take a measurement at any time by pressing the START button located on the front of the device.

Step 3

Remain still for 30 seconds

After the 6-second preparation stage is complete, the device will begin the ECG reading.

During this period, try to remain still, and do not flex or move your fingers or arms until the reading is complete.

Step 4

Save the reading

Once the measurement is complete, the device will provide the heart rate and a basic analysis of the ECG reading.

Select the OK button to save the results within the device.

Important Things To Know While Using.

Keep still and DO NOT move or speak until the reading is complete

Make sure the electrodes are directly touching your skin

If your hands are dry, wipe them with a damp cloth so that they are slightly moist

Ensure your fingers, hands, and arms are in a relaxed position

Sit comfortably with your back straight

Rest your elbows on a sturdy surface

If this is the first time using the device or if you haven’t used the device in a while, try repeating the reading process up to 3 times to allow the device to adjust to your body type

If after repeating the reading process with your hands, the device continues to display the Unexpected Heart Rate message, try taking a chest measurement.

If the monitor continues to display the Unexpected Heart Rate message after taking the chest measurement, consider consulting a physician or using the SMART Monitoring Service to upload your ECGs through GEMS Home for analysis.

Registering a User

Step 1

Download GEMS Home onto your computer. The link is at the bottom of this Page.

Step 2

Connect the PEN to your computer

Launch the GEMS Home application and, using the USB cable provided, connect the PEN to your computer.

GEMS Home will take a moment to authenticate your PEN device.

Step 3

Select the MANAGE USERS section and enter your contact information into the fields. Select the Verify button at the bottom of the form when completed.

Sending ECG Reports for Analysis

Step 1

Launch GEMS Home

Launch GEMS Home by double-clicking the GEMS Home icon located on your desktop or find and click the GEMS Home link within your program files.

Step 2

Connect the PEN to your computer

Using the USB cable provided, connect the PEN to your computer. GEMS Home will take a moment to detect your PEN device.

Step 3

Upload ECG readings

Select the MANAGE YOUR DATA section of GEMS Home and select the UPLOAD HRS button on the left.

The import process may take a few moments depending on how many heart rhythm files are stored on your device.

Step 4

In the SMART Monitoring Review section of GEMS Home, select the REQUEST SMART MONITORING REVIEW button.

Check the heart rhythm file or files you would like to have reviewed and select the UPLOAD SELECTED HRs button to begin uploading the selected heart rhythm files.

It will take 30 min to receive your ECG Analysis Report from the time you upload your ECG files.